Reinforcing Steel Mesh Welding Machine Supplier
Publish Time: 2019-03-05 Origin: Site
Reinforcing Steel Mesh Welding Machine adopts synchronous control technology. The welding time and separation welding are controlled by the automatic control system and HMI, and the operation is more intelligent. The welding transformers work separately to reduce the capacity requirements of the power transformer and reduce the inrush current. Wire and cross wires are pre-linear and pre-cut.
Strengthen the welding machine, the welding force comes from the spring. Reinforcing Steel Mesh Welding Machine is easy to control the welding pressure, ten times more than the traditional hopper.
The enhanced Reinforcing Steel Mesh Welding Machine adopts PLC control technology. The welding time and separation welding are performed by Japan, Sony Digital control system, and the touch screen control panel can be input to adjust the grid size. Different sizes of mesh can be welded on the same wire mesh board.
The cross feed wire is automatic and driven by a stepper motor, allowing the cross wire to fall and the mesh size to be more accurate.
The grid traction system is controlled by stepper motor, the mesh hole is easy to gel, the mesh opening size is accurate, and the welding aperture can be adjusted freely within a certain range.
The enhanced Reinforcing Steel Mesh Welding Machine uses a touch screen operating system to change the soldering time and mesh size.