Fence mesh machine

Our fence mesh machine is specifically designed to produce welded mesh for construction, such as reinforced concrete in RC and SRC applications.

Fence mesh machine can be customized according to customer requirements; but within our design range to improve machine efficiency and performance.

In general, we use two types of welding mechanisms: for smaller wire gauges; we use pneumatic welding systems; for larger wire gauges; we use hydraulic welding systems.

Solder a larger wire gauge for the machine; the line needs to be pre-tensioned and pre-cut and manually inserted into the automatic cable holder for automatic transfer to the welding system. The crosshairs need to be straightened and cut to length and loaded into the automatic cross-cartridge/feeder for automatic cross-feeding to the welding system.
PLC control panel with advanced touchable color screen. Easy to operate and error messages will be displayed on the screen for troubleshooting.

Fence mesh machine is designed to produce welded meshes with smaller wire gauges using a pneumatic welding mechanism. The lines will be routed from the coils to the welding mainframe, which will be stored in the line battery to reduce the resistance of the servo motor when the required cross-line spacing size is produced. The crosshairs need to be straightened and cut to length and loaded into the automatic cross-cartridge/feeder for automatic cross-feeding to the welding system.